Hikvision’s ISC West 2020 Vendor Solution Sessions to Overview Affordable Performance Thermal and PanoVu Panoramic Cameras

January 20, 2020

Hikvision HikWire blog article ISC West Vendor Sessions

Take part in Hikvision’s two ISC West vendor solution sessions, providing an overview on our new, affordable high-performance thermal cameras as well as our PanoVu panoramic cameras. Each session will be hosted on Wednesday, March 18 during ISC West, which takes place March 17-20, 2020 at the Sands Expo in Las Vegas.

On Wednesday, March 18 from 3 p.m. to 4 p.m. in the Sands Room 101, “Performance Series Thermal Cameras,” will be presented by Hikvision USA director of sales engineering, Mike Hendrix. This manufacturers training session will give attendees a complete overview of Hikvision’s Performance Series Thermal Cameras. Learn the basics of thermal imaging and the specifics of Hikvision’s newest thermal cameras.  With outstanding thermal image quality and detection capabilities, this series is ideal for a variety of applications. Learn about special features such as how the performance series can be used for short-range perimeter protection and fire protection, and how the cameras’ multipoint temperature monitoring can help end users prevent equipment failure. This training session is perfect for integrators who want to diversify and expand their business, and increase profits.

Also on Wednesday, March 18, from 4 p.m. to 5 p.m. in the Sands 101, Hikvision will present, “PanoVu Overview: Innovative Systems for Retail, Education, Large Venues and More,” led by Hikvision sales engineer, Stuart Landrum. This session will give attendees a complete overview of Hikvision’s PanoVu product lines, which includes: PanoVu Flexible, PanoVu Mini, PanoVu 180 Panoramic, and PanoVu 180/360 Panoramic + PTZ. PanoVu hosts features such as 4x individual gimbal 2.8-8mm lens, image stitching, built-in analytics, + 36x IR PTZ, and 3x module + PTZ. Hikvision’s PanoVu products are essential components of solutions in retail, large venues, transportation and education applications. Learn how Hikvision’s intuitive, innovative PanoVu systems can help you solve security issues for many vertical market applications. 

You can also visit Hikvision in the exhibit hall at booth #18037, where our team will be showcasing thermal cameras, new technologies, key vertical market solutions, and more. The ISC West exhibit hall will be open from 10 a.m. to 5 p.m. on Wednesday, March 18 and Thursday, March 19. It will remain open from 10 a.m. to 3 p.m. on Friday, March 20.

IMPORTANT! This model requires non-standard firmware. Do Not Install standard firmware (e.g. v.4.1.xx) on this model. Doing so will permanently damage your system. You must use custom firmware v.4.1.25 from the iDS-9632NXI-I8/16S product page.

View the most updated version of this document here:


The I-series NVR (such as the DS-7716NI-I4) is one of Hikvision's most popular and feature-rich recorders. As such, many firmware revisions have been introduced over the years to continually ensure the product is compatible with the newest technology available. Due to the many revisions, we recommend that the user closely follows the instructions below in order to reduce the amount of time spent as well as the chance of failure.


Database Optimization and Repair

As more affordable IP cameras are introduced over time with greater video resolution and data sizes, more efficient database management also becomes necessary. The introduction of firmware v4.0 brought about a new database architecture in order to be futureproof.


After upgrading to v4.X, the recorder database will need to be converted and optimized. If you are experiencing issues where playback is expected but not found, make sure "Database Repair" is performed as indicated in the procedures and scenarios below.


Preparing the Upgrade

Before proceeding with upgrade, it is recommended that NVR configuration file is exported from the NVR over the network or on to a local USB drive.


Upgrading from v3.4.92 build 170518 or Older

  1. All recorders must reach v3.4.92 before proceeding further. Upgrading from versions before v3.4.92 directly to any version of v4.X will likely cause the recorder to fail.
  2. If the recorder is already at v3.4.92, a full factory default is highly recommended before upgrading to any version of v4.X. There is a high chance of unit failure (requiring RMA) if the unit is not defaulted before upgrade.
  3. After reaching v3.4.92 and performing a full factory default, an upgrade directly to v4.50.00 is acceptable.
  4. After the upgrade is completed and the recorder is reprogrammed, it may be beneficial to perform a Database Repair. For details, refer to the section "Database Optimization and Repair" above.
  5. To verify repair progress, you may refer to the HDD status, or search the recorder log for repair started and stopped entries. Note that while the HDD is repairing, new recordings are still being made, but some existing recordings may not be searchable until repair is complete.
  6. If you continue to observe playback issues after database repair, ensure there are no power, network, or motion detection issues. Should the problem persist, contact technical support.


Upgrading from Any v4.X Build to v4.50.00.

  1. Any v4.X build can be upgraded directly to v4.50.00.
  2. Export configuration is highly recommended before performing the upgrade.
  3. If upgrading from any v4.X version that was not v4.22.005, a Database Repair is recommended. Refer to Step 4 and onwards in the previous section.



Downgrading is not recommended. Due to new features and parameters constantly being added, downgrading may cause the NVR to factory default itself or require a manual default to operate properly.

By downloading and using software and other materials available via this website, you agree to be legally bound by HIKVISION General Terms of Use . If you don’t agree to these terms, you may not download or use any of those materials.

If you are agreeing on behalf of your company, you represent and warrant that you have legal authority to bind your company to the General Terms of Use above. Also you represent and warrant that you are of the legal age of majority in the jurisdiction in which you reside (at least 18 years of age in many countries).