Reset

Security Magazine Provides Insights for Data Security Breach Readiness and Response Plans

December 4, 2018

Hikvision Cybersecurity Blogs Outline Best Practices, Tips to Prevent Malware, Vulnerabilities, Security Concerns

Hikvision Cybersecurity Blogs Outline Best Practices, Tips to Prevent Malware, Vulnerabilities, Security Concerns

 

In the article, “Is Your Data Breach Response Plan Ready?” Security magazine provides insight on security breaches and best practices for companies to develop data breach response plans, with interview responses from Michael Bruemmer, the vice president of data breach resolution and consumer protection at Experian.

From the article: “Fifty-six percent of organizations experienced a data breach involving more than 1,000 records over the past two years, and of those, 37 percent occurred two to three times and 39 percent were global in scope, according to Experian. In 2017 in particular, there were more than 5,000 reported data breaches worldwide, and there were more than 1,500 in the U.S. alone.”

In the article, Bruemmer said more companies have data security breach response plans in place than ever before, at 88 percent, versus 61 percent five years ago. He recommends that companies practice implementation of their response plan before an incident occurs, so that all parties know how to work together to be resilient and cyber-secure.

Artificial intelligence, machine learning, and crypto-mining malware are the top three issues Bruemmer recommends security leaders prepare for next year. He said that “hackers can also leverage these as tools to create more sophisticated attacks than traditional phishing scams or malware attacks.”

The article also covers the shortage of cybersecurity talent, strategies to engage C-suite executives in cybersecurity, and tips to maintain the resilience of security breach response plans. Click here to read the entire article.

Hikvision has authored a number of cybersecurity blogs that outline best practices and provide tips to prevent malware, vulnerabilities, and security concerns. For more information about improving cybersecurity, click here.

IMPORTANT! This model requires non-standard firmware. Do Not Install standard firmware (e.g. v.4.1.xx) on this model. Doing so will permanently damage your system. You must use custom firmware v.4.1.25 from the iDS-9632NXI-I8/16S product page.

View the most updated version of this document here:

https://techsupportca.freshdesk.com/en/support/solutions/articles/17000113531-i-series-nvr-firmware-upgrade-instructions

 

The I-series NVR (such as the DS-7716NI-I4) is one of Hikvision's most popular and feature-rich recorders. As such, many firmware revisions have been introduced over the years to continually ensure the product is compatible with the newest technology available. Due to the many revisions, we recommend that the user closely follows the instructions below in order to reduce the amount of time spent as well as the chance of failure.

 

Database Optimization and Repair

As more affordable IP cameras are introduced over time with greater video resolution and data sizes, more efficient database management also becomes necessary. The introduction of firmware v4.0 brought about a new database architecture in order to be futureproof.

 

After upgrading to v4.X, the recorder database will need to be converted and optimized. If you are experiencing issues where playback is expected but not found, make sure "Database Repair" is performed as indicated in the procedures and scenarios below.

 

Preparing the Upgrade

Before proceeding with upgrade, it is recommended that NVR configuration file is exported from the NVR over the network or on to a local USB drive.

 

Upgrading from v3.4.92 build 170518 or Older

  1. All recorders must reach v3.4.92 before proceeding further. Upgrading from versions before v3.4.92 directly to any version of v4.X will likely cause the recorder to fail.
  2. If the recorder is already at v3.4.92, a full factory default is highly recommended before upgrading to any version of v4.X. There is a high chance of unit failure (requiring RMA) if the unit is not defaulted before upgrade.
  3. After reaching v3.4.92 and performing a full factory default, an upgrade directly to v4.50.00 is acceptable.
  4. After the upgrade is completed and the recorder is reprogrammed, it may be beneficial to perform a Database Repair. For details, refer to the section "Database Optimization and Repair" above.
  5. To verify repair progress, you may refer to the HDD status, or search the recorder log for repair started and stopped entries. Note that while the HDD is repairing, new recordings are still being made, but some existing recordings may not be searchable until repair is complete.
  6. If you continue to observe playback issues after database repair, ensure there are no power, network, or motion detection issues. Should the problem persist, contact technical support.

 

Upgrading from Any v4.X Build to v4.50.00.

  1. Any v4.X build can be upgraded directly to v4.50.00.
  2. Export configuration is highly recommended before performing the upgrade.
  3. If upgrading from any v4.X version that was not v4.22.005, a Database Repair is recommended. Refer to Step 4 and onwards in the previous section.

 

Downgrading

Downgrading is not recommended. Due to new features and parameters constantly being added, downgrading may cause the NVR to factory default itself or require a manual default to operate properly.

By downloading and using software and other materials available via this website, you agree to be legally bound by HIKVISION General Terms of Use . If you don’t agree to these terms, you may not download or use any of those materials.

If you are agreeing on behalf of your company, you represent and warrant that you have legal authority to bind your company to the General Terms of Use above. Also you represent and warrant that you are of the legal age of majority in the jurisdiction in which you reside (at least 18 years of age in many countries).