Reset

Embedded Plug and Play PoE NVR

0
DS-7732NI-I4/24P
Embedded Plug and Play PoE NVR

The Hikvision DS-7732NI-I4/xP NVR provides high resolution, high video compression and HDMI video output up to 4K. The DS-7732NI-I4/xP’s 16 or 24 independent PoE connections offer easy setup.


Warning for I-Series NVR users:

Before upgrading to v4.1.10 or 4.1.11 firmware. Be sure the NVR is on at least firmware 3.4.92 or 3.4.93. Failure to have the NVR on either of these firmware versions before upgrading to v4.1.10 could render the NVR in-operable.

  • 32 IP Camera Inputs
  • 12 MP Recording Resolution
  • 4K (3840 × 2160) HDMI Video Output
  • Incoming Bandwidth: 320 Mbps/Outgoing Bandwidth 256 Mbps
  • Long Distance (100 to 300 m) Network Transmission via PoE

IMPORTANT! This model requires non-standard firmware. Do Not Install standard firmware (e.g. v.4.1.xx) on this model. Doing so will permanently damage your system. You must use custom firmware v.4.1.25 from the iDS-9632NXI-I8/16S product page.

By downloading and using software and other materials available via this website, you agree to be legally bound by HIKVISION General Terms of Use . If you don’t agree to these terms, you may not download or use any of those materials.

If you are agreeing on behalf of your company, you represent and warrant that you have legal authority to bind your company to the General Terms of Use above. Also you represent and warrant that you are of the legal age of majority in the jurisdiction in which you reside (at least 18 years of age in many countries).