Reset

Perimeter Protection

Temperature Screening Main Banner Celsius
HIKVISION PERIMETER PROTECTION:

THE FIRST LINE OF DEFENSE

What We Offer

Perimeter protection plays a crucial role in protecting high-risk sites, commercial real estate, and factory spaces in both urban and remote locations.

Over the past decade, advances in technology, such as alarms, sensors, radar and thermal cameras, and hardware have vastly improved perimeter security systems

Historically, perimeter protection was fraught with problems of false alarms. Fortunately, the development of advanced algorithms has helped to reduce false alarms. Hikvision’s diversified perimeter protection solutions provide reliable verification that greatly reduce false alarms. Solutions range from deep learning algorithm-based video products, to thermal cameras, and radar products.

HIKVISION VIDEO-BASED PERIMETER PROTECTION SOLUTIONS

Solution Overview  Fast Deployment Thermographic Camera

Thermal Solution

Installing thermal imaging cameras on a perimeter can provide a highly-effective technology tool for advanced detection, spotting intruders in adverse weather conditions such as fog, smog, rain and snow, and even after-hours when it is dark outside. Thermal offers:

  • Environmental adaptability
  • Thermal detection beyond the visible spectrum
  • Longer detection range

Learn more about Thermal Imaging >>

Solution Overview  Fast Deployment Thermographic Camera

Deep Learning Solution

Equipped with advanced algorithms, Hikvision’s Deep Learning Series products—including DeepinView network cameras, DeepinMind NVRs, AcuSense network cameras, and NVRs—offer sophisticated alarm activation by distinguishing people and vehicles from other moving objects, such as leaves, raindrops, shadows, and more. This enables security staff to focus on real threats, saving time and manpower.

  • False alarm reduction with higher accuracy
  • Quick target search
  • High resolution images
  • Easy deployment and installation

Learn more about Deep Learning technology >>

Solution Overview  Fast Deployment Thermographic Camera

Radar Solution

When monitoring large, exposed areas with harsh weather, and where the perimeter environment poses challenges to deployment of only video surveillance cameras, security radar is the ideal option.

  • Fewer false alarms using digital beam-forming technology and intelligent analysis algorithms
  • IP67 and IK09 rated, all-weather approved
  • Accurate detection over a wide area
  • Visual intruder verification through video linking

APPLICATIONS

Download the recommended product list for Perimeter Protection from here.

Solution Overview  Fast Deployment Thermographic Camera

Villa/Gated Communities

Product

Recommended Model

Camera

 

PCI-LB15F2SL (2.8mm)

PCI-LB15F4SL (4mm)

PCI-LB15F6SL (6mm)

DS-2TD1217-2/PA (1.8mm)

DS-2TD1217-3/PA (3.1mm)

DS-2TD1217-6/PA (6.2mm)

 

Network Recorder

I series NVR

 

Monitor

 

DS-D5022FC

 

Network Switch

 

DS-3E0510P-E

Warehouses /Office Buildings

Product

Recommended Model

 

Thermal Camera

 

DS-2TD2617-3/PA

DS-2TD2617-6/PA

DS-2TD2617-10/PA

 

Network Recorder

 

I series NVR

 

CMS

 

HikCentral Professional

Solution Overview  Fast Deployment Thermographic Camera

Construction Site

Product

Recommended Model

 

Camera

 

PCI-LB15F2SL (2.8mm)

PCI-LB15F4SL (4mm)

PCI-LB15F6SL (6mm)

Or

DS-2CD7A46G0-IZHSx

 

Network Recorder

 

DS-7716NI-I4/16P

Large Outdoor Area

Large Outdoor Area

Product

Recommended Model

 

Thermal Camera

 

DS-2TD2637-10/P

DS-2TD2637-15/P

DS-2TD2637-25/P

DS-2TD2637-35/P

 

Speed Dome

 

DS-2DF9C245IHS-DLW

 

Network Recorder
 

 

DS-7716NI-I4/16P
 

CMS Monitor

HikCentral Professional

DS-D5032FL

 

Switch

 

DS-3E0510P-E

Factory

Product

Recommended Model

 

Radar Speed Dome

 

iDS-2SR8141IXS-AB

 

Network Recorder

 

DS-7716NI-I4/16P

 

CMS

 

HikCentral Professional

 

Switch

 

DS-3E0510P-E

 

Monitor

 

DS-D5043FL-B

Product spotlight

Contact Us

IMPORTANT! This model requires non-standard firmware. Do Not Install standard firmware (e.g. v.4.1.xx) on this model. Doing so will permanently damage your system. You must use custom firmware v.4.1.25 from the iDS-9632NXI-I8/16S product page.

View the most updated version of this document here:

https://techsupportca.freshdesk.com/en/support/solutions/articles/17000113531-i-series-nvr-firmware-upgrade-instructions

 

The I-series NVR (such as the DS-7716NI-I4) is one of Hikvision's most popular and feature-rich recorders. As such, many firmware revisions have been introduced over the years to continually ensure the product is compatible with the newest technology available. Due to the many revisions, we recommend that the user closely follows the instructions below in order to reduce the amount of time spent as well as the chance of failure.

 

Database Optimization and Repair

As more affordable IP cameras are introduced over time with greater video resolution and data sizes, more efficient database management also becomes necessary. The introduction of firmware v4.0 brought about a new database architecture in order to be futureproof.

 

After upgrading to v4.X, the recorder database will need to be converted and optimized. If you are experiencing issues where playback is expected but not found, make sure "Database Repair" is performed as indicated in the procedures and scenarios below.

 

Preparing the Upgrade

Before proceeding with upgrade, it is recommended that NVR configuration file is exported from the NVR over the network or on to a local USB drive.

 

Upgrading from v3.4.92 build 170518 or Older

  1. All recorders must reach v3.4.92 before proceeding further. Upgrading from versions before v3.4.92 directly to any version of v4.X will likely cause the recorder to fail.
  2. If the recorder is already at v3.4.92, a full factory default is highly recommended before upgrading to any version of v4.X. There is a high chance of unit failure (requiring RMA) if the unit is not defaulted before upgrade.
  3. After reaching v3.4.92 and performing a full factory default, an upgrade directly to v4.50.00 is acceptable.
  4. After the upgrade is completed and the recorder is reprogrammed, it may be beneficial to perform a Database Repair. For details, refer to the section "Database Optimization and Repair" above.
  5. To verify repair progress, you may refer to the HDD status, or search the recorder log for repair started and stopped entries. Note that while the HDD is repairing, new recordings are still being made, but some existing recordings may not be searchable until repair is complete.
  6. If you continue to observe playback issues after database repair, ensure there are no power, network, or motion detection issues. Should the problem persist, contact technical support.

 

Upgrading from Any v4.X Build to v4.50.00.

  1. Any v4.X build can be upgraded directly to v4.50.00.
  2. Export configuration is highly recommended before performing the upgrade.
  3. If upgrading from any v4.X version that was not v4.22.005, a Database Repair is recommended. Refer to Step 4 and onwards in the previous section.

 

Downgrading

Downgrading is not recommended. Due to new features and parameters constantly being added, downgrading may cause the NVR to factory default itself or require a manual default to operate properly.

View the most updated version of this document here:
K-Series DVR upgrade instruction
The Turbo 4 Hybrid DVR K series has multiple models and across different platform and chipset. It also has similar firmware development of other recording product line; DVR K series has also introduced the GUI4.0 to ensure the series to be compatible to the newest technology available. The new database architecture is also brought into the DVR firmware v4.0 to be future proof and for better recording search experience. 
 


Database Optimization and Repair

As more affordable cameras introduced over time with greater video resolution and data sizes, more efficient database management also becomes necessary. The introduction of firmware v4.0 brought about a new database architecture in order to be futureproof.
After upgrading to v4.X, the recorder database will need to be converted and optimize. If you are experiencing issues, where playback is expected but not found, please make sure to perform "Database Rebuild" as indicated in the procedures and scenarios below.
 


Preparing the Upgrade

Before proceeding with upgrade, it is recommend exporting DVR configuration file from the DVR over the network or on to a local USB drive.

 

Action after firmware upgraded 

1. Upgrade the DVR according to the chart above. 

2. Reconfirming Channel's Recording Schedule 

    - Confirm channel's recording schedule is enable. 

    - Check if the channel is on correct recording schedule.

3. Double Check Storage Setting

    - Make sure all channel are assigned to record on its HDD group when the Storage setting is under Group Mode. 

4. Perform Database Rebuild locally. 

    • Some version above support Database Rebuild via web access - K51 and K72

    • Perform Database Rebuild regardless if system is having any database issue symptom. 

    • Database Rebuild process is average ~30 to 60min per TB. The process may still varies depends recording data.

    • After Database Rebuild - Check log to confirm Database Rebuild has went thru properly. 

    • If Database Rebuild Started and Stopped log has been log only within few minutes. Database rebuild may not has been completed properly. It is strongly recommend performing the Database Rebuild again.

    • To check log > System > Log > Information > Database Rebuild Started and Stopped.

    • If the log option is not available - access system via SSH can also obtain similar result.

5. Recording Data is still missing after database rebuild process. 

If the data has not been recorded or has been overwritten, Database rebuild process is not able retrieve those lost data. Have the system upgraded to the latest available firmware version above to prevent any future data lost is strongly recommended for all application.

 

 

 

 

By downloading and using software and other materials available via this website, you agree to be legally bound by HIKVISION General Terms of Use . If you don’t agree to these terms, you may not download or use any of those materials.

If you are agreeing on behalf of your company, you represent and warrant that you have legal authority to bind your company to the General Terms of Use above. Also you represent and warrant that you are of the legal age of majority in the jurisdiction in which you reside (at least 18 years of age in many countries).