Reset

Pendant Mounting Bracket

0
PP1
Pendant Mounting Bracket

The bracket should be installed on a flat wall, and waterproof rubber is necessary for outdoor appli-cations. The wall must be capable of supporting over three times as much as the total weight of the camera and the mount. The maximum load ca-pacity of the bracket is 4.4 lbs (2 kg).

  • Aluminum Alloy with Surface Spray Treatment
  • Camera Can Be Fixed Directly on the Bracket
  • Pendant mounting bracket

IMPORTANT! This model requires non-standard firmware. Do Not Install standard firmware (e.g. v.4.1.xx) on this model. Doing so will permanently damage your system. You must use custom firmware v.4.1.25 from the iDS-9632NXI-I8/16S product page.

By downloading and using software and other materials available via this website, you agree to be legally bound by HIKVISION General Terms of Use . If you don’t agree to these terms, you may not download or use any of those materials.

If you are agreeing on behalf of your company, you represent and warrant that you have legal authority to bind your company to the General Terms of Use above. Also you represent and warrant that you are of the legal age of majority in the jurisdiction in which you reside (at least 18 years of age in many countries).