Reset

Network Access Controller

0
DS-K2604-G
Network Access Controller

Hikvision’s DS-K260x-G series Access Controller is supplied with the latest structure TCP/IP and RS-485 communication interface. Communication data is encrypted to improve system security. The controller also supports offline operation and is designed with a tamper-proof switch.

  • TCP/IP, RS-485
  • Storage for up to 100,000 (can be expended to 200,000) cards
  • 4 card readers (RS-485 Interface, Hikvision only); 4 card readers (Wiegand Interface, W26/34 Reader, or custom Wiegand via iVMS-4200 configuration)
  • RS-485 and Wiegand Access Card Reader Interface
  • -40° to 60° F (-40° C to 140° C)
  • Working Humidity: 10% to 90%
  • 17.7" x 15.7" x 3.7" (450 mm x 400 mm x 93.7 mm)

IMPORTANT! This model requires non-standard firmware. Do Not Install standard firmware (e.g. v.4.1.xx) on this model. Doing so will permanently damage your system. You must use custom firmware v.4.1.25 from the iDS-9632NXI-I8/16S product page.

By downloading and using software and other materials available via this website, you agree to be legally bound by HIKVISION General Terms of Use . If you don’t agree to these terms, you may not download or use any of those materials.

If you are agreeing on behalf of your company, you represent and warrant that you have legal authority to bind your company to the General Terms of Use above. Also you represent and warrant that you are of the legal age of majority in the jurisdiction in which you reside (at least 18 years of age in many countries).