Reset

Optical Fingerprint Recorder

DS-K1F820-F
Optical Fingerprint Recorder

Hikvision’s DS-K1F820-F Fingerprint Recorder supports living fingerprint registration and identification. It connects to a computer directly through the USB interface and uploads/downloads fingerprint characteristic data and image to the controller/module. It also checks the completeness of the registered fingerprint.

  • Communication Interface: USB 2.0
  • 5 VDC, 200 mA
  • -22° to 158° F (-30° to +70° C)
  • Humidity: 20% to 80%
  • 3.94" x 1.89" x 1.38" (100 mm × 48 mm × 35 mm)

IMPORTANT! This model requires non-standard firmware. Do Not Install standard firmware (e.g. v.4.1.xx) on this model. Doing so will permanently damage your system. You must use custom firmware v.4.1.25 from the iDS-9632NXI-I8/16S product page.

By downloading and using software and other materials available via this website, you agree to be legally bound by HIKVISION General Terms of Use . If you don’t agree to these terms, you may not download or use any of those materials.

If you are agreeing on behalf of your company, you represent and warrant that you have legal authority to bind your company to the General Terms of Use above. Also you represent and warrant that you are of the legal age of majority in the jurisdiction in which you reside (at least 18 years of age in many countries).