Reset

IP-Based Fingerprint Access Control Terminal

0
DS-K1T201MF/C
IP-Based Fingerprint Access Control Terminal

DS-K1T201MF (without camera)
DS-K1T201MF-C (with camera)

Hikvision’s DS-K1T201MF-C optical IP-based fingerprint access control terminals feature multiple advanced technologies, including fingerprint recognition, face detection, Wi-Fi, smart card recognition, LCD display screen, and picture capturing technology.

  • Terminal mode: Uplink (TCP/IP, Wi-Fi), downlink (RS-485) Card reader mode: Uplink (Wiegand 26/34, RS-485)
  • 256 MB storage
  • Maximum 32 GB, built-in microSD card
  • Door magnetic sensor x 1, alarm input x 2, tamper-resistant switch x 1, exit button x 1
  • 12 VDC
  • -4° to 149° F (-20° to 65° C)
  • 10% to 90% (non-condensing)
  • 4.8" × 5.6" × 1.1" (122 mm × 142 mm × 27 mm)

IMPORTANT! This model requires non-standard firmware. Do Not Install standard firmware (e.g. v.4.1.xx) on this model. Doing so will permanently damage your system. You must use custom firmware v.4.1.25 from the iDS-9632NXI-I8/16S product page.

By downloading and using software and other materials available via this website, you agree to be legally bound by HIKVISION General Terms of Use . If you don’t agree to these terms, you may not download or use any of those materials.

If you are agreeing on behalf of your company, you represent and warrant that you have legal authority to bind your company to the General Terms of Use above. Also you represent and warrant that you are of the legal age of majority in the jurisdiction in which you reside (at least 18 years of age in many countries).