Reset

Standalone Access Control Terminal

0
DS-K1T105M
Standalone Access Control Terminal

Hikvision’s DS-K1T105M/M-C is a standalone access control terminal with picture capturing function. The DS-K1T105M/M-C is designed with a 2.8-inch color LCD screen, and HD camera (2 MP optional). It supports two network communication methods (TCP/IP and Wi-Fi) and supports offline operation.
Mounting is via a standard U.S. single gang box.

  • TCP/IP, Wi-Fi, RS-485, and Wigand 26/34 (under card reader mode only)
  • Mifare card reading
  • 256 MB storage
  • Door magnetic sensor x 1, alarm input x 2, tamper-resistant switch x 1, exit button x 1
  • 12 VDC
  • -4° to 149° F (-20° to 65° C)
  • 10% to 90% (non-condensing)
  • 4.8" × 3.2" × 0.9" (122 mm × 82 mm × 23 mm)

IMPORTANT! This model requires non-standard firmware. Do Not Install standard firmware (e.g. v.4.1.xx) on this model. Doing so will permanently damage your system. You must use custom firmware v.4.1.25 from the iDS-9632NXI-I8/16S product page.

By downloading and using software and other materials available via this website, you agree to be legally bound by HIKVISION General Terms of Use . If you don’t agree to these terms, you may not download or use any of those materials.

If you are agreeing on behalf of your company, you represent and warrant that you have legal authority to bind your company to the General Terms of Use above. Also you represent and warrant that you are of the legal age of majority in the jurisdiction in which you reside (at least 18 years of age in many countries).