Network Access Controller

Network Access Controller
Replacement product:

Hikvision’s DS-K2600 Series access controllers aredesignedwith the latest communication protocols such as TCP/IP andRS-485 interfaces. The communication data is encrypted toimprove the system security. The controller also supportsoffline operation and is designed with a tamper-proof switch.

  • RS-485, Wiegand (W26/W34)
  • cards information:100,000 (200,000 expandable) access control events :300,000 (600,000 expandable)
  • 8 card readers (RS-485 interface) 4 card readers (Wiegand interface)
  • Alarm input × 4, door sensor × 1, exit button × 1, case input × 2, tamper alarm × 1
  • Power Dissipation ≤4 W
  • -4°to140°F(-20°to60°C
  • 10% to 90% (non-condensing)
  • 4.6"x 13.6"x 3.5" (370mm x 345mm x 90 mm)

IMPORTANT! This model requires non-standard firmware. Do Not Install standard firmware (e.g. v.4.1.xx) on this model. Doing so will permanently damage your system. You must use custom firmware v.4.1.25 from the iDS-9632NXI-I8/16S product page.

By downloading and using software and other materials available via this website, you agree to be legally bound by HIKVISION General Terms of Use . If you don’t agree to these terms, you may not download or use any of those materials.

If you are agreeing on behalf of your company, you represent and warrant that you have legal authority to bind your company to the General Terms of Use above. Also you represent and warrant that you are of the legal age of majority in the jurisdiction in which you reside (at least 18 years of age in many countries).