Reset

vehicle entrance control

Temperature Screening Main Banner Celsius
Enhance Vehicle Access Management & Site Security

Improving Parking Entrance Management

What we offer

Vehicle access management has become increasingly complex. Identifying vehicles at parking entrances can provide benefits for businesses, residences, and a range of industries, such as improving security at the entrance to schools, offices, and factories.

In the past, license plate recognition (LPR) was costly, unreliable, and only relevant for a limited number of applications. Errors were commonplace. Because the available hardware could not reliably read license plates, extra staff was required. Additionally, low-light areas, oblique vantage points, and non-standard characters caused problems with the detection and capture of license plates.

Today’s LPR cameras, engineered with deep learning algorithms and GPU processors, are accurate—more than sufficient to overcome previous challenges.

Hikvision’s LPR systems learn number plate information within a scene, efficiently recognizing a much higher number of automobile plates compare to conventional LPR systems. They also no longer require frequent and often cumbersome camera positioning adjustments.

HIKVISION LPR SOLUTION FEATURES

Temperature Screening safe

Efficiency

Ultra-high accuracy rate for license plate recognition and non-stop vehicle flow monitoring

Temperature Screening Security

Security

Auto-alarm triggering for unauthorized license plates

ANPR flexibility

Flexibility

Easy deployment and installation

Temperature Screening smart

Centralized Management

Complete vehicle passing records and report generation, real-time alarm management and health monitoring on all devices.

Application & Benefits

Advantage of Thermal Technology celsius
  • Vehicle Entrance & Exit Management / Barrier Control
  • Customer Experience: Quick Alerts When Vehicle Of Interest Enters The Property
  • Increased Safety: Ensure Only Pre-Authorized Vehicles are Allowed to Enter the Property
  • Improve Visitor Record Search and Retention: Easily Post Event Investigation for Forensic Review
  • Mitigate Risk: Receive Alerts if Unauthorized Vehicles Enter the Property
  • Reduce Costs: Comprehensive Monitoring with Limited Staff, Reduced Investments in Barriers and Guard Houses

Recommended Products

Advantage of Thermal Technology celsius

Product

Recommended Model

Network Camera

DS-2CD7A26G0/P- IZHS

DS-2CD7A26G0/P- IZHS8

Network Video Recorder

I series NVR

Network Intercom

DS-K1T500S

Software

HikCentral Professional

Download

Product spotlight

Contact Us

IMPORTANT! This model requires non-standard firmware. Do Not Install standard firmware (e.g. v.4.1.xx) on this model. Doing so will permanently damage your system. You must use custom firmware v.4.1.25 from the iDS-9632NXI-I8/16S product page.

View the most updated version of this document here:

https://techsupportca.freshdesk.com/en/support/solutions/articles/17000113531-i-series-nvr-firmware-upgrade-instructions

 

The I-series NVR (such as the DS-7716NI-I4) is one of Hikvision's most popular and feature-rich recorders. As such, many firmware revisions have been introduced over the years to continually ensure the product is compatible with the newest technology available. Due to the many revisions, we recommend that the user closely follows the instructions below in order to reduce the amount of time spent as well as the chance of failure.

 

Database Optimization and Repair

As more affordable IP cameras are introduced over time with greater video resolution and data sizes, more efficient database management also becomes necessary. The introduction of firmware v4.0 brought about a new database architecture in order to be futureproof.

 

After upgrading to v4.X, the recorder database will need to be converted and optimized. If you are experiencing issues where playback is expected but not found, make sure "Database Repair" is performed as indicated in the procedures and scenarios below.

 

Preparing the Upgrade

Before proceeding with upgrade, it is recommended that NVR configuration file is exported from the NVR over the network or on to a local USB drive.

 

Upgrading from v3.4.92 build 170518 or Older

  1. All recorders must reach v3.4.92 before proceeding further. Upgrading from versions before v3.4.92 directly to any version of v4.X will likely cause the recorder to fail.
  2. If the recorder is already at v3.4.92, a full factory default is highly recommended before upgrading to any version of v4.X. There is a high chance of unit failure (requiring RMA) if the unit is not defaulted before upgrade.
  3. After reaching v3.4.92 and performing a full factory default, an upgrade directly to v4.50.00 is acceptable.
  4. After the upgrade is completed and the recorder is reprogrammed, it may be beneficial to perform a Database Repair. For details, refer to the section "Database Optimization and Repair" above.
  5. To verify repair progress, you may refer to the HDD status, or search the recorder log for repair started and stopped entries. Note that while the HDD is repairing, new recordings are still being made, but some existing recordings may not be searchable until repair is complete.
  6. If you continue to observe playback issues after database repair, ensure there are no power, network, or motion detection issues. Should the problem persist, contact technical support.

 

Upgrading from Any v4.X Build to v4.50.00.

  1. Any v4.X build can be upgraded directly to v4.50.00.
  2. Export configuration is highly recommended before performing the upgrade.
  3. If upgrading from any v4.X version that was not v4.22.005, a Database Repair is recommended. Refer to Step 4 and onwards in the previous section.

 

Downgrading

Downgrading is not recommended. Due to new features and parameters constantly being added, downgrading may cause the NVR to factory default itself or require a manual default to operate properly.

View the most updated version of this document here:
K-Series DVR upgrade instruction
The Turbo 4 Hybrid DVR K series has multiple models and across different platform and chipset. It also has similar firmware development of other recording product line; DVR K series has also introduced the GUI4.0 to ensure the series to be compatible to the newest technology available. The new database architecture is also brought into the DVR firmware v4.0 to be future proof and for better recording search experience. 
 


Database Optimization and Repair

As more affordable cameras introduced over time with greater video resolution and data sizes, more efficient database management also becomes necessary. The introduction of firmware v4.0 brought about a new database architecture in order to be futureproof.
After upgrading to v4.X, the recorder database will need to be converted and optimize. If you are experiencing issues, where playback is expected but not found, please make sure to perform "Database Rebuild" as indicated in the procedures and scenarios below.
 


Preparing the Upgrade

Before proceeding with upgrade, it is recommend exporting DVR configuration file from the DVR over the network or on to a local USB drive.

 

Action after firmware upgraded 

1. Upgrade the DVR according to the chart above. 

2. Reconfirming Channel's Recording Schedule 

    - Confirm channel's recording schedule is enable. 

    - Check if the channel is on correct recording schedule.

3. Double Check Storage Setting

    - Make sure all channel are assigned to record on its HDD group when the Storage setting is under Group Mode. 

4. Perform Database Rebuild locally. 

    • Some version above support Database Rebuild via web access - K51 and K72

    • Perform Database Rebuild regardless if system is having any database issue symptom. 

    • Database Rebuild process is average ~30 to 60min per TB. The process may still varies depends recording data.

    • After Database Rebuild - Check log to confirm Database Rebuild has went thru properly. 

    • If Database Rebuild Started and Stopped log has been log only within few minutes. Database rebuild may not has been completed properly. It is strongly recommend performing the Database Rebuild again.

    • To check log > System > Log > Information > Database Rebuild Started and Stopped.

    • If the log option is not available - access system via SSH can also obtain similar result.

5. Recording Data is still missing after database rebuild process. 

If the data has not been recorded or has been overwritten, Database rebuild process is not able retrieve those lost data. Have the system upgraded to the latest available firmware version above to prevent any future data lost is strongly recommended for all application.

 

 

 

 

By downloading and using software and other materials available via this website, you agree to be legally bound by HIKVISION General Terms of Use . If you don’t agree to these terms, you may not download or use any of those materials.

If you are agreeing on behalf of your company, you represent and warrant that you have legal authority to bind your company to the General Terms of Use above. Also you represent and warrant that you are of the legal age of majority in the jurisdiction in which you reside (at least 18 years of age in many countries).