Prix Décerné

juin 05, 2019
Hikvision USA Inc. est lauréat du prix ESX Innovation pour la troisième année consécutive, reconnaissant “l’innovation...
juin 25, 2018
La camera de Hikvision MV-SM412-00GM VPU Industrial Smart Camera a été nominée pour le German Inspect Award 2019 dans...
juin 19, 2018
Cette semaine, à l'exposition Electronic Security Expo (ESX) à Nashville, au Tennessee, l'équipe Hikvision présentera...
juin 05, 2018
"Hikvision a le plaisir d'annoncer que sa caméra IP Thermal Bi-Spectrum a été nommée lauréate ESX Innovation Award...
mai 30, 2018
Le magazine Canadian Security est à la recherche de candidatures pour son prix annuel qui récompensera le directeur de...
mai 02, 2018
La Fondation ASIS, établie par ASIS International, commence à accepter les demandes de bourses et de subventions pour...
avril 25, 2018
Des nominations ont été lancées pour la liste annuelle «20 moins de 40 ans » de Security Systems News (SSN), une...
mars 22, 2018
Hikvision USA Inc. is pleased to announce it was selected as the recipient of both “Supplier of the Year 2017” and...
janvier 22, 2018
Hikvision USA Inc., chef de file en matière d’intelligence artificielle, d’apprentissage machine, de robotique et d’...
décembre 18, 2017
In its recently released "Security 50 Ranking and Reports" a&s magazine announced that Hikvision took the No. 1...
décembre 17, 2017
Hikvision, based in the Chinese city of Hangzhou, recently announced that its DeepinView network PTZ security camera...
décembre 03, 2017
Hikvision was recognized as a top emerging physical security vendor in 2017 by Ingram Micro, which recently awarded...
octobre 31, 2017
Le siège social de Hikvision qui est situé dans la ville de Hangzhou, en Chine, a annoncé, dans un communiqué de...
octobre 10, 2017
  Hikvision Europe a été le récipiendaire du prix GIT de sécurité 2018 (GIT Security Award 2018) dans la catégorie de...
septembre 28, 2017
UK integrator publication PSI Magazine voted the new Hikvision DS-2TD2136 Network Thermal Bullet security camera the ...

IMPORTANT! Ce modèle nécessite un logiciel non standard. N'installez pas de logiciel standard (par exemple, v.4.1.xx) sur ce modèle. Cela endommagerait définitivement votre système. Vous devez utiliser le logiciel personnalisé v.4.1.25 à partir de la page du produit iDS-9632NXI-I8/16S

View the most updated version of this document here:

https://techsupportca.freshdesk.com/en/support/solutions/articles/17000113531-i-series-nvr-firmware-upgrade-instructions

 

The I-series NVR (such as the DS-7716NI-I4) is one of Hikvision's most popular and feature-rich recorders. As such, many firmware revisions have been introduced over the years to continually ensure the product is compatible with the newest technology available. Due to the many revisions, we recommend that the user closely follows the instructions below in order to reduce the amount of time spent as well as the chance of failure.

 

Database Optimization and Repair

As more affordable IP cameras are introduced over time with greater video resolution and data sizes, more efficient database management also becomes necessary. The introduction of firmware v4.0 brought about a new database architecture in order to be futureproof.

 

After upgrading to v4.X, the recorder database will need to be converted and optimized. If you are experiencing issues where playback is expected but not found, make sure "Database Repair" is performed as indicated in the procedures and scenarios below.

 

Preparing the Upgrade

Before proceeding with upgrade, it is recommended that NVR configuration file is exported from the NVR over the network or on to a local USB drive.

 

Upgrading from v3.4.92 build 170518 or Older

  1. All recorders must reach v3.4.92 before proceeding further. Upgrading from versions before v3.4.92 directly to any version of v4.X will likely cause the recorder to fail.
  2. If the recorder is already at v3.4.92, a full factory default is highly recommended before upgrading to any version of v4.X. There is a high chance of unit failure (requiring RMA) if the unit is not defaulted before upgrade.
  3. After reaching v3.4.92 and performing a full factory default, an upgrade directly to v4.50.00 is acceptable.
  4. After the upgrade is completed and the recorder is reprogrammed, it may be beneficial to perform a Database Repair. For details, refer to the section "Database Optimization and Repair" above.
  5. To verify repair progress, you may refer to the HDD status, or search the recorder log for repair started and stopped entries. Note that while the HDD is repairing, new recordings are still being made, but some existing recordings may not be searchable until repair is complete.
  6. If you continue to observe playback issues after database repair, ensure there are no power, network, or motion detection issues. Should the problem persist, contact technical support.

 

Upgrading from Any v4.X Build to v4.50.00.

  1. Any v4.X build can be upgraded directly to v4.50.00.
  2. Export configuration is highly recommended before performing the upgrade.
  3. If upgrading from any v4.X version that was not v4.22.005, a Database Repair is recommended. Refer to Step 4 and onwards in the previous section.

 

Downgrading

Downgrading is not recommended. Due to new features and parameters constantly being added, downgrading may cause the NVR to factory default itself or require a manual default to operate properly.

En téléchargeant et en utilisant des logiciels et autres matériels disponibles sur ce site, vous acceptez d'être lié par les Conditions Générales d'Utilisation de HIKVISION. Si vous n'acceptez pas ces conditions, vous ne pouvez télécharger aucun de ces documents. Si vous êtes d'accord sur votre entreprise, vous déclarez et garantissez que vous avez le pouvoir de lier votre entreprise aux Conditions Générales d'Utilisation . Vous déclarez et garantissez également que vous avez l'âge légal de la majorité dans la juridiction dans laquelle vous résidez (au moins 18 ans dans de nombreux pays).