Optimize Operations & Safety with Touch-Free Face Mask Detection from a Safe Distance, Multiple Solutions for Various Applications and Industries

février 26, 2021

Hikvision HikWire blog article Optimize Operations & Safety with Touch-Free Face Mask Detection from a Safe Distance

Watch Video: Temperature Screening Access Control Terminal with Audible Reminders to Wear a Face Mask

 

Face masks are an integral part of daily life and detecting them before someone enters a building or facility can address today’s unique business challenges. Hikvision's mask detection solutions offer several options for various applications and industries using conventional cameras, our access control screening terminal, or thermographic skin-temperature screening cameras. 

Hikvision mask detection solutions are touch-free and verify masks from a safe distance with automated scanning, audible alerts, and notifications that remind an individual to wear a mask before they enter the premises. Advanced solutions offer mask detection with rapid skin-temperature screening. HikCentral CMS is an optional software that can be paired with each configuration to support remote viewing and reporting of temperature readings and mask detection data.

Hikvision’s portfolio of mask detection solutions offers several options to support a variety of business applications:

  • Conventional Cameras: This solution can use existing security cameras to verify masks and enable entry if a face mask is verified. It works using conventional security cameras paired with Hikvision’s deep learning DeepinMind NVR. It can be used for multiple locations and the screen prompt turns green to allow entry if the person’s temperature is normal and they are wearing a mask.
     
  • Temperature Screening Terminal: Combine access control, temperature screening and mask detection with an all-in-one device. Hikvision’s Temperature Screening Terminal works as a touch-free access control terminal that pre-screens for skin-temperature and mask detection simultaneously. Watch the YouTube video that illustrates its functionality with audible alerts that can remind a user to wear a face mask before entering the premises.
     
  • Thermographic Temperature Screening Cameras: Use Hikvision’s unique line of temperature reading cameras for proactive skin-temperature screening and mask detection at the main building entrance. Hikvision has several housing models (bullet, turret and handheld) thermographic cameras for skin-temperature screening and face mask detection.

Visit the Mask Detection Solutions Webpage for more information. To request a demo, fill out this form to have someone contact you.

 

*Disclaimer: Hikvision’s Thermographic Cameras are designed for immediate detection and preliminary screening of elevated skin-surface temperature in high-traffic areas. When measuring core body temperature, please verify through the use of clinical measurement devices and/or by consulting a medical professional. Hikvision’s Thermographic Cameras must be used in accordance with local laws and regulations.

IMPORTANT! Ce modèle nécessite un logiciel non standard. N'installez pas de logiciel standard (par exemple, v.4.1.xx) sur ce modèle. Cela endommagerait définitivement votre système. Vous devez utiliser le logiciel personnalisé v.4.1.25 à partir de la page du produit iDS-9632NXI-I8/16S

View the most updated version of this document here:

https://techsupportca.freshdesk.com/en/support/solutions/articles/17000113531-i-series-nvr-firmware-upgrade-instructions

 

The I-series NVR (such as the DS-7716NI-I4) is one of Hikvision's most popular and feature-rich recorders. As such, many firmware revisions have been introduced over the years to continually ensure the product is compatible with the newest technology available. Due to the many revisions, we recommend that the user closely follows the instructions below in order to reduce the amount of time spent as well as the chance of failure.

 

Database Optimization and Repair

As more affordable IP cameras are introduced over time with greater video resolution and data sizes, more efficient database management also becomes necessary. The introduction of firmware v4.0 brought about a new database architecture in order to be futureproof.

 

After upgrading to v4.X, the recorder database will need to be converted and optimized. If you are experiencing issues where playback is expected but not found, make sure "Database Repair" is performed as indicated in the procedures and scenarios below.

 

Preparing the Upgrade

Before proceeding with upgrade, it is recommended that NVR configuration file is exported from the NVR over the network or on to a local USB drive.

 

Upgrading from v3.4.92 build 170518 or Older

  1. All recorders must reach v3.4.92 before proceeding further. Upgrading from versions before v3.4.92 directly to any version of v4.X will likely cause the recorder to fail.
  2. If the recorder is already at v3.4.92, a full factory default is highly recommended before upgrading to any version of v4.X. There is a high chance of unit failure (requiring RMA) if the unit is not defaulted before upgrade.
  3. After reaching v3.4.92 and performing a full factory default, an upgrade directly to v4.50.00 is acceptable.
  4. After the upgrade is completed and the recorder is reprogrammed, it may be beneficial to perform a Database Repair. For details, refer to the section "Database Optimization and Repair" above.
  5. To verify repair progress, you may refer to the HDD status, or search the recorder log for repair started and stopped entries. Note that while the HDD is repairing, new recordings are still being made, but some existing recordings may not be searchable until repair is complete.
  6. If you continue to observe playback issues after database repair, ensure there are no power, network, or motion detection issues. Should the problem persist, contact technical support.

 

Upgrading from Any v4.X Build to v4.50.00.

  1. Any v4.X build can be upgraded directly to v4.50.00.
  2. Export configuration is highly recommended before performing the upgrade.
  3. If upgrading from any v4.X version that was not v4.22.005, a Database Repair is recommended. Refer to Step 4 and onwards in the previous section.

 

Downgrading

Downgrading is not recommended. Due to new features and parameters constantly being added, downgrading may cause the NVR to factory default itself or require a manual default to operate properly.

En téléchargeant et en utilisant des logiciels et autres matériels disponibles sur ce site, vous acceptez d'être lié par les Conditions Générales d'Utilisation de HIKVISION. Si vous n'acceptez pas ces conditions, vous ne pouvez télécharger aucun de ces documents. Si vous êtes d'accord sur votre entreprise, vous déclarez et garantissez que vous avez le pouvoir de lier votre entreprise aux Conditions Générales d'Utilisation . Vous déclarez et garantissez également que vous avez l'âge légal de la majorité dans la juridiction dans laquelle vous résidez (au moins 18 ans dans de nombreux pays).